▌XADO Revitalizant EX120
for diesel engines
The product is designed for restoration, repair and antiwear protection of diesel engines including high-powered and turbocharged ones
Application
The treatment of the engine is to be carried out in 3 stages:
1st Stage
Introduce the contents of the syringe into the oilfiller neck of the engine warmed up to the operating temperature. Start the engine and let it idle for 5–10 minutes.
2nd Stage
It is carried out in the same way after 100–250 km (60–150 miles) of run.
3rd Stage
It is to be carried out in the same way after 100–250 km (60–150 miles) of run. The treatment is considered complete after 1,500 km (900 miles) km of run.
Dosage
| Oil system capacity, L | 3–10 | 11–20 | 21–30 |
| Quantity of 8 ml syringes,pcs | 1+1+1 | 2+2+2 | 3+3+3 |
| Treatment pattern | single-stage | ||
| Quantity of syringes for new engines | 2 | 4 | 6 |
Note
1. It is not recommended to change oil until the treatment has been completed.
2. New engines with less than 20,000 km (12,500 miles) of run are to be treated in one stage.
3. It is recommended to treat overhauled engines in 3 stages according to the normal procedure.
4. Treatment of engines running on LPG is the same as for gasoline engines.
5. The protective ceramic-metal coating is formed on any operating mechanism, however, if the mechanism (engine) is in critical state (100% wear), it is required to replace destroyed parts.